Arrow Abrasive
Products
Contact
Safety Information
Pay Here
Metric Conversion
About Us
Safety Information 
  • DO's
  • DO visually inspect all wheels before mounting for possible damage in transit.
  • DO always handle and store wheels in a careful manner.
  • DO check maximum operating speed established for the wheel against machine speed
  • DO check mounting flanges for equal and correct diameter. (Should be at least 1/3 diameter of the wheel and relieved around hole.)
  • DO use mounting blotters supplied with wheels.
  • DO be sure work rest is properly adjusted. (Center of the wheel or above; no more than 1/8" away from the wheel.)
  • DO always use a guard covering at least one-half of the wheel.
  • DO allow newly mounted wheels to run at operating speed, with guard in place, for at least one minute before grinding or cutting.
  • DO always wear safety glasses or some type of eye protection when grinding or cutting.
  • DO turn off coolant before stopping the wheel to avoid creating an out-of-balance condition.
  • DON'T
  • DON"T use a wheel that has been dropped.
  • DON'T force a wheel onto the machine or alter the size of the mounting hole - if the wheel won't fit the machine, get one that will.
  • DON"T ever exceed maximum operating speed established for the wheel.
  • DON'T use mounting flanges on which the bearing surfaces are not clean and flat.
  • DON'T tighten the mounting nut excessively.
  • DON'T grind on the side of the wheel unless wheel is specifically designed for that purpose.
  • DON'T start the machine until the wheel guard is in place.
  • DON'T jam work into the wheel.
  • DON'T stand directly in front of a grinding wheel whenever a grinder is started.
  • DON'T grind or cut material for which the wheel is not designed.

Arrow Abrasive Co., Inc.
12033-1/2 Regentview Ave
Downey, California  90241
Toll Free (800) 859-2282   
Fax (562) 861-3160
Email: arrowabrasive@earthlink.net

 

 

 

 

 

 

 

 

 

 

 

 

 

Products you'll find at Arrow Abrasive: Arrow Abrasive, Arrow Abrasives, abrasive wheels, abrasive cut off wheels, cut off wheels, grinding wheels, reinforced cut off wheels, reinforced wheels, high speed wheels, Type 27 Wheels, industrial supply. welding supplies, welding equipment, metal cutting wheels, masonry cutting wheels, abrasive cut-off machines, cut-off machines, cutting machines, abrasive cut-off wheels, cut-off wheels, cutting wheels, abrasive cutting, steel cutting, metal cutting, cutting, wire rope cutting, hydraulic hose cutting, non-ferrous cutting, ferrous cutting, plastic cutting, cutting solids and shapes, cutting solids, cutting shapes, metallurgical lab cutting, metallurgical cutting, cut-off saws, saws, cut-off, metal cut-off saws, metal saws, non-ferrous cut-off saws, non-ferrous saws, plastic cut-off saws, plastic saws, fully automatic saws, automatic saws, contractors saws, contractors abrasive cut-off machines, contractors machines, hydraulic hose abrasive cut-off machines, hydraulic hose cut-off machines, hydraulic cut-off machines, wire rope abrasive cut-off machines, wire rope cut-off machines, wire rope abrasive machines, machines, cut-off machines, grades, chop saw, pipe cutting, tube cutting, abrasive mitering machines, abrasive machines, mitering machines, mitering saws, mitering, abrasive, mitering cut-off, abrasive double mitering machines, double mitering machines, double mitering saws, double saws, wet abrasive cut-off, wet abrasive cut-off wheels, wet cut-off wheels, dust collection, wire rope cut-offs, dry abrasive machines, wet abrasive machines, wheel grades, fiberglass wheels, dry wheel grades, wet wheel grades, fully automatic cut-off saws, blades, California manufacturer, california, Downey, CA, cutting non-ferrous material, cutting ferrous material, high quality abrasive cut-off machines, high quality cutting, high quality abrasive cut-off wheels, wet cut-off wheels, cut-off applications, manual clamping, pneumatic clamping, hydraulic power down feed, wet cutting, dry cutting, metallurgical cutting applications, dry cutting saws, wet cutting saws, dry cut-off wheels,

Site Powered By
    EasyOnlineSiteBuilder
    Online web site design